SharePlease- feel free to share this page with
a friend! Por favor, siéntase libre para compartir
esta página con un amigo! Thank you for visiting
my humble 900+ page site. Come on in,
make sure your coffee's freshly topped off. A
handy share button is found on the bottom of most
pages, or just copy the address from the
navigation bar at your page top. This
page links you to my vast toy room, and
you can be here for literally hours and
not see everything. Minigun and Browning
videos and construction plans, airsoft videos and
gun mods, and a whole lot more that's very
unexpected. Please, tell your friends
about at least one page before you
leave?
This is the
shrike M4
conversion.
It is three parts and a few ancillary
bits
Sponsor Links
This is TWO complete feed lids for the shrike M4
conversion. It is three parts and a few ancillary
bits.
Those same parts,
flipped over.Holes in the underside of
the feed lid are for cable-ties, to hold the string of shells
in place.
Cutouts in the center
underside clear the airsoft version2 gearbox. This is a solid
item, despite not being made of metal.
The notches at the front tabs here are so I can
align the hinge hole.
SharePlease- feel free to share this page with a
friend! Por favor, siéntase libre para compartir esta
página con un amigo! Thank you for visiting my humble
900+ page site. Please feel free to Bookmark
this site, and come back again when you have more time.
I thank you for coming by to visit Killbucket's,
"The best place to spend your boss's
time"!
