HOME M2 M1919 MINIGUN PRIVACY SITEMAP PATTERN SETS
Please- feel free to share this page with
a friend! Por favor, siéntase libre para compartir
esta página con un amigo! Thank you for visiting
my humble 900+ page site. Come on in,
make sure your coffee's freshly topped off. A
handy share button is found on the bottom of most
pages, or just copy the address from the
navigation bar at your page top. This
page links you to my vast toy room, and
you can be here for literally hours and
not see everything. Minigun and Browning
videos and construction plans, airsoft videos and
gun mods, and a whole lot more that's very
unexpected. Please, tell your friends
about at least one page before you
3 channel remote controlled S107 helicopter
The motor in the highest position in this
picture drives the upper rotor set.
In other words, a Syma S107's back motor
powers the upper rotor.
In later model S107's and Helizone
Firebirds, these two metal pins may lack heads as you see
here. While it makes assembly faster, it allows the parts to
slip out of mesh in a crash.
If your S107 lower rotor set quits
spinning, make sure the gears haven't been jarred out of
The inner side plates and
If you find yourself needing to go
further than this, a whole new copter is a better idea if you
have the money. But, if you're like me, you have fun in the
turning of screws, so...
Here's the proper routing of the tail
motor wires, which are notoriously fragile.
Pristine, never-run gears look like this.
Avoid too much SILICONE or SYNTHETIC grease only, as it tends
to attract pet hairs. And never, ever use WD40 or any other
PETROLEUM-based lube on any toy with
Another look at a properly assembled
geartrain for a Syma S107 or Helizone Firebird. Hey, let's all
go to the last page now, huh?
Please- feel free to share this page with a
friend! Por favor, siéntase libre para compartir esta
página con un amigo! Thank you for visiting my humble
900+ page site. Please feel free to Bookmark
this site, and come back again when you have more time.