|
FREE AIRSOFT M4 BELT FEED JPG PATTERNS
BELOW!!! Share
|
   
PLASTIC CUTTING
TIPS AND TECHNIQUES CLICK HERE.
Buy ABS building
material sheets from Killbucket, The King of Airsoft
Customizers. - 1/4 thick, black, SOLID ABS sheet,
10 x 24 inches, TWO pieces, enough to build ANY of my
patterns with plenty to spare. Shipped UPS, Continental
USA only. Just $42.50, postage is included!
|
Get The Giant Killbuckets Airsoft
and Dummy Guns Designs TODAY.
FAST Download-Just $16
ALL Airsoft CAD
ever created by Killbucket, in dxf and dwg formats.
UPDATED files are
YEARS ADVANCED ahead of the FREE jpg versions.
Designs supported
by over 350 Custom Airsoft gun Builds.
FAST
Download-Just $16
PayPal
Welcome |
   
THE CAD FOR All Killbucket Designs
- THE KILLBUCKETS AIRSOFT GUN PACK- JUST
$16.
LIMITED TIME
ONLY.
PLASTIC CUTTING TIPS
AND TECHNIQUES CLICK HERE.
Killbucket, The King of Airsoft
Customizers is now Semi-Retired and builds
Bespoke Custom Airsoft weapons For The Select Few. Less
than 12 Killbucket Airsoft guns are produced each year,
so making your own is a great way to get a Custom
Machinegun into YOUR arsenal. Even if you lack CAD and
building skills, you can take these files to any
competent machinist for quick parts
production.
ALL SALES ARE FINAL WITHOUT
EXCEPTION
|
The full machine gun plans set
for creating this machine gun: RIGHT-CLICK TO
DOWNLOAD
all parts are 1/4
inch ABS plastic unless otherwise specified.
Print these airsoft Shrike machine gun
conversion pages
on normal notebook size, or any A4 size
paper.
Print at 300dpi, and you will have sharp,
correctly sized copies.
The
parts are stacked to make the Ares shrike upper
form.
|
Killbucket's jpg files are SHAREWARE.
Please feel free to make a small donation if you've
found them
useful. |
|
|
|
|
SEE THIS PAGE FOR PRINTING
GUIDELINES
PLEASE SUPPORT THIS
FINE PRODUCT BY UP-GRADING TO THE CURRENT VERSION
NO SUPPORT INFORMATION IS PROVIDED OR
IMPLIED FOR THIS DESIGN.
No layout, no
measuring:
THESE ARE
FULL-RESOLUTION, ACTUAL-SIZED PATTERNS YOU CAN PRINT OUT AND
USE AS STENCILS FOR MAKING PRECISELY-FITTING COMPONENTS. ALL
THE DESIGN AND ENGINEERING IS ALREADY DONE FOR YOU. ALL YOU DO
IS "TRACE" THE OUTLINES, AND YOU GET PARTS THAT
WORK!
Allows you to trace
parts onto your favorite 1/4 inch (6mm) build material. 24" x
48" is more than enough, for any model listed.
NO CAD
needed.
That's right- these
are the finished, final revision prints, ACTUAL SIZED, of the
parts that have made all of these patterns a success for over
four years running.
No Printing
Hassle
Pattern files are
standard jpg format, and easily print from any
computer/printer (see below for a video
demonstration).
Simple Shapes,
Simple cutting:
The Brownings are
basically decorated boxes, the miniguns: decorated tubes.
Parts were all configured for EASY cutting using normal HAND
tools: coping saw, bar clamps, hand drill. If you have a small
scroll saw and an electric drill, you can make any one of the
assemblies in a few short evenings.
Assembly is
EASY
Parts are assembled
using Oatey black ABS cement, sold in the plumbing aisle of
your local hardware store.
ABS bonds set up in
amatter of minutes- you can assemble your whole gun conversion
in ONE evening, easily! Common hardware (this is left to the
builder) in assembly allows customization- go brass,
stainless, ?
I thank you for coming by to
visit Killbucket's, "The best place to spend your boss's
time"!
Share
| Please- feel free to
share this page with a
friend!
|
|
