|
Killbucket's Home built MacGlashan Practice
Gun Project
I
really liked shooting the airguns at the Clark county Fair each
Year...
Determine where
the barrel centerline will be, and draw everything from that
reference, or Datum. The MacGlashan has some gear that
protrudes from the top-front. Look under the front of thre
sight tube, and you'll see what I'm talking about. I'm going
to exploit this feature, and allow the top of the AK to be
this part. This will make the casing shorter top-to-bottom,
for a better length/width ratio.
I've determined
the side panel size, and made some 1.75 wide strips two make
the main box sides and ends.-So far, all material's been cut
with a Stanley knife blade. Two deep scores in the sheet, bend
and snap.
This poor
BetaSpetz has been subject to about four paintjobs, and as
many custom shells.
Left it
like this overnight. Applying the Just Walk Away Human rule,
so the bonds will all cure up perfectly aligned. I could have
made the box a bit narrower, but I wanted plenty of room
inside for gas gear if It decide to add that in later. But I
think it looks close enough!
NEXT
PAGE
|
|
|
I thank you for coming by to visit Killbucket's,
"The best place to spend your boss's
time"!
Share
| Please- feel free to
share this page with a
friend!
|
|
